Exothermic Sleeves - 1600 ND
Introduction :
ACEFEED-EX-ND is used as top feeder for feeding all grades of Iron & Steel Castings. Due to the smaller contact area, it will reduce gas cutting & the grinding work.
It offers benefit of the breaker core & in many cases, it is possible to knock off the feeder. The contact diameter of the sleeve is less than 50% of the original diameter of the sleeve thus contact area is minimized. Hence it is suitable where the casting contact area is limited.
Application:
ACEFEED-EX-ND is used as top feeder to get benefit such as low grinding & low gas cutting work due to reduced opening.
It is suitable for ram-up application. It is suitable where space is limited in case of conventional sleeves.
Advantages:
Usage Guidelines :
Selection of Sleeve Sizes:
Sr. No.
|
Sleeve size (mm) (ID x height) |
Modulus (mm) |
Volume of metal in sleeves (cc) |
ID (mm) |
Height (mm) |
Pack size (Nos.) |
|
---|---|---|---|---|---|---|---|
Effective | Geometric | ||||||
1 |
ND 1.5 |
9-10 |
6-6.5 |
52-57 |
20 |
60 |
200 |
2 |
ND 2 |
13.7-14.7 |
7.5-8.5 |
80-90 |
20 |
60 |
128 |
3 |
ND 3 |
21-22 |
12-13 |
285-295 |
30 |
87 |
72 |
4 |
ND 4 |
27.5-28.5 |
16-17 |
690-700 |
40 |
115 |
24 |
5 |
ND 5 |
34.5-35.5 |
20-21 |
1300-1320 |
50 |
135 |
16 |
6 |
ND 6 |
40-41 |
24-25 |
2180-2200 |
60 |
160 |
10 |
7 |
ND 150 (150x200) |
42-42.5 |
27-27.5 |
3075-3100 |
150 |
200 |
8 |
8 |
ND 180 (180x200) |
47-47.5 |
30-30.5 |
4200-4225 |
180 |
200 |
8 |
9 |
ND 200 (200x200) |
49.5-50 |
31.5-32 |
4975-5000 |
200 |
200 |
5 |
10 |
ND 225 (225x200) |
51-51.5 |
34-34.5 |
6150-6175 |
225 |
200 |
4 |
11 |
ND 250 (250x200) |
53.5-54 |
35.5-36 |
7300-7325 |
250 |
200 |
4 |
12 |
ND 300 (300x200) |
56.5-57 |
37.5-38 |
9575-9600 |
300 |
200 |
2 |
13 |
ND 350 (350x200) |
57-57.5 |
39-39.5 |
12225-12250 |
350 |
200 |
2 |
14 |
ND 400 (400x200) |
57.5-58 |
39.5-40 |
14650-14675 |
400 |
200 |
1 |
Gat No.994/1, Sanaswadi, Tal-Shirur, Nareshwar Temple Road, Pune – 412208. (Maharashtra) India.
9552625080