SSKIPL

Manufacturer of various foundry products

Parting Agent

PARTING AGENT GSM

INTRODUCTION :

PARTING AGENT GSM is a special parting agent suitable for manufacturing green sand moulds. It prevents sticking of sand to pattern and ensures easy release of moulds.

PURPOSE :

While making moulds, normally sand sticking to pattern has been observed which gives difficulties in stripping mould or corebox and also gives uneven rough surface which finally lead to poor casting finish on mould.

Conventionally foundries are using graphite powder, kerosene & LDO as a pattern release agents for green sand applications. These materials are having limitations & in many cases leads to casting related defects like pinholes .Number of strips per application with the above materials are very low.

PARTING AGENT GSM forms a uniform film on the pattern. This reduces the stripping resistances and ensures an easy mould/core stripping. It enables multiple strips per application thereby improving productivity.

Even under very unfavorable conditions several release operations are usually possible.

BENEFITS :

APPLICATION :

STANDARD PACKING:

20kg bucket.

SHELF LIFE:

6 Months from date of manufacture.

STORAGE :

The product should be stored at room temperature under roof and away from direct sunlight, heat and moisture.

PARTING AGENT W

INTRODUCTION :

PARTING AGENT-W is an excellent releasing agent. The product is a blend of silicon oil(High temp .lubricant) & water in a stable emulsion form. The product is recommended for easy stripping of shell cores/moulds.

PHYSICAL PROPERTIES :

APPLICATION :

PARTING AGENT -W is a ready to use liquid & is applied by spraying uniformly on shell pattern (core/moulds)in hot conditions. Heavy spraying is not done to avoid unwanted deposition of residual silicon oil on dies/pattern. Initially apply the spray through out the pattern for stripping subsequently when a fine film of silicon oil is formed on dies/patterns then the frequency can be reduce depending on integrity & geometry of the dies/pattern.

ADVANTAGES :

STANDARD PACKING :

PARTING AGENT -W is available in 20 lit.,35Lit. 50Lit polycarboys also available in 200 liter drums.

SHELF LIFE:

6 Months from date of manufacture.

STORAGE :

The product should be stored at room temperature under roof and away from direct sunlight, heat and moisture.